Metal forming oils

Products

Typical   pH(5%)

Main applications

MC Draw 728

9.2

Emulsifiable, suitable for  copper wires drawing with  medium and fine wires.

MC Draw 855

8.4

Emulsifiable, universal purpose. is suitable for wire drawing of copper, aluminum and cables of thick and medium wires.

MC Draw 118SX

8.3

Water-soluble, suitable for drawing copper wires with thin and fine wires.

MC Draw 37

9.1

Water-soluble, used for continuous casting and rolling of copper rods.

MC FORM 27

9.5

Suitable for cold bending processing of various ferrous metals, especially for welded steel pipes, with good lubricity, rust prevention and cleaning performance.

MC Draw 722

9.1

Heavy load water-based deep drawing oil, suitable for various stamping and deep drawing processes, free of chlorine and sulfur, suitable for ferrous and non-ferrous metals.

MC Draw 758

9.1

Heavy load water-based deep drawing oil, containing chlorine, used for various heavy load deep drawing and stamping processes. Concentrate can be directly used for heavy load deep drawing processes of large-sized steel parts or ductile alloys,  and after dilution, it can be used for ordinary stamping processes.

MC Tubform 512

9.8

Fully water-soluble, bio-stable, nitrite free, used for the sealing test and short-term rust protection in the steel tube forming process.

MC Tubform 798

10.0

Bio-stable, emulsifiable, nitrite free, high lubricity and very good corrosion protection, high resistance against hard water. Suitable for steel tube forming and other various heavy-load machining processes.

MC Tubform 376

9.7

Fully water-soluble, low foam/odor, nitrite free, used for steel forming and other low-medium load machining processes. Very good cleaning and rust protection, high resistance against hard water.

Products

Typical parameters

Characteristics and applications

Viscosity (40℃,mm²/s)

flash point    (COC,℃)

MC Fin 358

1.65

65

Volatile fin stamping oil for 7-26FPI (0.9mm-3.6mm) flange heights, as well as bending and expanding tubes.

MC Fin 380

1.66

65

Volatile fin stamping oil, used for stamping fins and small parts with a flange height of 5-25FPI (1mm-5mm), stainless steel heat dissipation fins,as well as bending and expanding tubes.

MC Fin 390

1.85

68

Volatile fin stamping oil for stamping 4-6FPI (4mm-7mm) fins and small metal parts, as well as bending and expanding tubes.

MC Draw 1028

150

182

Aluminum wire drawing oil, used for large aluminum wire drawing.

MC Draw 2815

29

172

Used for medium-size aluminum wire drawing, and also for low load forming, drawing, and cutting operations of most metals.

MC Heading 750

51

171

Suitable for extrusion, stamping and forging of carbon steel, alloy steel, and stainless steel, especially bolt heading.

MC Form 80

80

185

Suitable for extrusion, stamping and forging of carbon steel, alloy steel, and stainless steel, especially bolt heading.

MC Form 8000A

8000

（@20℃）

230

Suitable for cold drawing of aluminium tube and stamping of steel.

MC FORM 675

76

182

Heavy load forming oil, chlorine free very good performances.

MC FORM 665

69

173

Heavy load forming oil used for deep drawing, stamping, punching and other processes, especially suitable heavy load medium to large deformation sizes of stainless steel and other steel parts.

Products

Viscosity (mm²/s)

Closed flash point（℃）

Copper corrosion

Features and main applications

MC EDM 100

2.4

100

1

Medium viscosity EDM oil, tool grinding oil, high-speed spindle cooling oil.

MC EDM 130

4.2

130

1

Higher viscosity EDM oil, tool grinding oil, high-speed spindle cooling oil.